DK Digital AVR-500, Руководство пользователя, Страница: 10 / 28

Connecting the antenna
For being able to receive radio programmes, connect the enclosed FM-projection
antenna for FM-reception and the AM-loop antenna for medium wave reception.
FM-antenna
For the FM-reception, please wind off the enclosed
projection antenna completely. Please push the
plug of the antenna on the central pin of the FM 75
ohm terminal. If your device is later working in
FM-operation, pass the antenna in such a way that
you achieve an optimal, noise-free reception.
If you connect an outside antenna, this antenna
must be grounded against lightning strikes. It is
essential that you discuss this matter with an
antenna expert.
Never try to install an outside antenna on the roof of a house on
your own. This is very dangerous and may only be done by qualified service
experts
.
AM-antenna
In order to install the enclosed medium wave antenna on a flat plane, assem-
ble it onto the stand as described in the following picture:
Connect the two connection wires of the medium wave antenna with the “AM
LOOP” terminals on the rear side of the receiver. Determine the optimal recepti-
on position of the antenna.
Tips:
Ø
In order to avoid disturbing noises during medium wave reception, please keep the loop
antenna away from speakers and other technical equipment.
Ø
You can also connect the cable network of the Telekom to the FM 75 ohm terminal. In
most cases, it transmits radio programmes as well.
10