Fan Speed
100%
Press
“▲”
or
“▼”
to set fan speed of VOLUME mode
1%～100%
Timer Interval
600s
Press
“▲”
or
“▼”
to set interval of TIMER mode
5～600s
Timer Duration
300s
Press
“▲”
or
“▼”
to set duration of TIMER mode
5～300s
DMX address
512
Press
“▲”
or
“▼”
to select DMX starting address
1-512
RDM-UID
512D00000001
Machine RDM-UID
512D00000001-
512D000FFFF1
Fluid Sensor
on
Press
“▲”
or
“▼”
to turn on/off no-fluid protection
function
On/off
Auto Run Last
Settings
yes
Press
“▲”
or
“▼”
to set if the machine will automatically
run
previous setting when power on again
Yes/no
Self-Clean &
Shut down
on
Press
“▲”
or
“▼”
to activate/deactivate Self-Clean mode
On/off
Work mode
Down mode
Press
“▲”
or
“▼”
to select Down mode/Up mode/Forward
mode
Down mode
Up mode
Forward mode
Pump Switch
on
The unit comes with two pumps. In case this function ON, the
pump switches to another every time when the unit is powere
d on Press “▲” or “▼” to select the status.
On/off
Status Pages
Self-Clean
Initializing...
When the unit is out of DMX control for 15 seconds, or if
holding “ENTER” button for 3 seconds, the unit will enter into
Self-Clean mode. Press any buttons or input DMX signal to exit
clean mode.
Self-Cleaning
180s
Self-Cleaning
Press any buttons or input DMX signal to be exit Self-Clean
mode.
4s-180s
Shutting Down
3s
When cleaning is finished, the LCD display will blackout and the
unit will enter into standby mode automatically.
1s-3s
Error
&
Warning
Pages
F
og Fluid Low
Refill
LCD display flickers to show fluid level is low.
Heating Failure
Contact Service
Heating failed
Pressure Low
Gas pressure is low.
