5.3
DMX Mode & Operation
Machine CAT-2 works with a DMX controller.
• Connect the product to a suitable power outlet.
• Turn the product on.
• Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.
When connected with DMX controller and receiving DMX signal, the LCD display will always show current DMX starting address which can
be reset by pressing “▲”or “▼“.
5.3.1
DMX Channel Assignments and Values
Channe
l
Function
Value
Description
1
Fan Speed
0-10
No Function
11-255
1-100%
increase.
No
function
when
under
the
forward
mode.
2
Fog Output
0-10
No Function
11-255
1-100% increase
3
Work Mode
0-85
Down mode
86-171
Up mode
171-255
Forward mode
4
Forced pumping mode
0-5
Turn off/reset the forced pumping mode
6-253
Hold, no operation
254-255
Enable the forced pumping mode and it will be shut down after 10
seconds. If you need to enable the forced pumping mode again,
please reset the forced pumping mode first.
5.4
RDM Function
”RDM-UID” is the only UID code for CAT-2. RDM allows two way communication between a controller and the unit. CAT-2 support 3 kinds
of sensor information as below.
Status
Value
Description
1
Heater Status
0
Heating
1
Heating finished
2
Fluid Sensor
0
Enough fluid
1
Low fluid
3
Pressure Sensor
0
Enough pressure
1
Low pressure
