©2013
DJI Innovations. All Rights Reserved.
12
Landing Gear
Landing Gear
Camera and
Gimbal
Camera and
Gimbal
Ai
rc
ra
ft
N
os
e
Ai
rc
ra
ft
N
os
e
X
X
Z
Z
Y
Y
G
im
ba
l N
os
e
G
im
ba
l N
os
e
Mounting brackets
and screws
Mounting brackets
and screws
Step3: Attach the gimbal to the landing gear then tighten the thread locking screws.
Notes:
Ensure that the correct side of the servo driver module 1 faces the direction of the aircraft tail.
Make sure the top and bottom plates of the dampening unit remain parallel when mounting in order to
prevent the damping unit from being stretched or distorted.
Keep overall balance when mounting, in order to ensure the center of gravity on the Z axis.
The gimbal center of gravity has already been set, which directly determines the gimbal’s performance.
Please do not adjust the gimbal center of gravity by yourself.
The gimbal is a high-precision controlled instrument. Do not remove any screws in the gimbal. Doing so
may result in decreased performance or even damage.
Do not unplug any cables which are attached to the gimbal ports, or attempt to change or customize the
mechanical structure.
Make sure the cable connections are correct and secure to ensure the gimbal works normally and is in full
control.
