dji PHANTOM 4 Скачать руководство пользователя

Страница: 26 / 65

Aircraft

Phantom 4

User Manual

Low Temperature Notice:

1. Battery capacity is significantly reduced when flying in low temperature (< 0°C) environments.

2. It is not recommended that the battery be used in extremely low temperature (< -10°C) environments.

Battery voltage should reach the appropriate level when operating environment with temperatures

between -10°C and 5°C.

3. End the flight as soon as the DJI GO app displays the “Low Battery Level Warning” in low temperature

environments.

4. Keep the battery indoors to warm it before flying in low temperature environments.

5. To ensure optimal performance of the battery, keep the battery temperature above 20°C.

6. The charger will stop charging the battery if the battery cell’s temperature is not within the operating

range (0°C ~ 40°C ).

In cold environments, insert the battery into the battery compartment and allow the aircraft for

approximately 1-2 minutes to warm up before taking off.

Checking the Battery Level

The Battery Level Indicators display how much power remains. When the battery is turned off, press

the Power Button once. The Battery Level Indicators will light up to display the current battery level. See

below for details.

Battery Level

LED1

LED2

LED3

LED4

Battery Level

87.5%~100%

75%~87.5%

62.5%~75%

50%~62.5%

37.5%~50%

25%~37.5%

12.5%~25%

0%~12.5%

=0%

Battery life

Battery life refers to how many more times the battery can be discharged and recharged before it must

be replaced. When the battery is turned off, press and hold the Power Button for 5 seconds to check the

battery life. The Battery Level Indicators will light up and/or blink for two seconds, as shown below:

Содержание PHANTOM 4



























































Результаты поиска

Содержание PHANTOM 4

Отзывы:

Похожие инструкции для PHANTOM 4

Бренды по названию

Популярные бренды

dji PHANTOM 4, Руководство пользователя

Результаты поиска

Содержание PHANTOM 4

Отзывы:

Похожие инструкции для PHANTOM 4

Бренды по названию

Популярные бренды