manualshive.com logo in svg

dji PHANTOM 4, Руководство пользователя

Поделиться
Скачать
dji PHANTOM 4 Скачать руководство пользователя страница 24

Aircraft

24

 

©

 2016 DJI. All Rights Reserved. 

Phantom 4

 

User Manual

 

Ensure that all propellers are in good condition before each flight. DO NOT use aged, chipped, 

or broken propellers. 

 

Stand clear of the motors and DO NOT touch the propellers when they are spinning.

Detaching the Propellers 

Hold the motor in place with one hand, then spin the propeller in the indicated unlock direction.

  Check that the propellers and motors are installed correctly and firmly before every flight. 

  Ensure that all propellers are in good condition before each flight. DO NOT use aged, chipped, 

or broken propellers.

  To avoid injury, STAND  CLEAR of and DO NOT touch propellers or motors when they are spinning.

 

ONLY use original DJI propellers for a better and safer flight experience. 

Attaching the Propellers

1.  Be sure to remove the warning stickers from the motors before attaching the propellers. 

2.  Mount the propellers with  black propeller rings to the motors with black dots. Mount the propellers with 

sliver propeller rings to the motors without black dots. Press t he propeller down onto the mounting 

plate and rotate in the lock direction until it is secured in its position. 

The Intelligent Flight Battery must be fully charged before using it for the first time. Refer to 

“Charging the Intelligent Flight Battery” for more information.

Be aware that the output power of the supplied Phantom 4 charger is 100W. 

DJI Intelligent Flight Battery

The DJI Intelligent Flight Battery has a capacity of 5350 mAh, a voltage of 15.2 V, and a smart charge/

discharge functionality. It should only be charged using an appropriate charger that has been approved 

by DJI.

Intelligent Flight Battery

Charger

Содержание PHANTOM 4


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды