©2012 DJI Innovations. All Rights Reserved.
26
change into home lock automatically when multi-rotor flies out the 10m range around home point.
2
When multi-rotor is flying by home lock, far away from you and the home point, please do not toggle
the X2 channel switch many times quickly so as to avoid the change of home point without you
knowing it.
3
By using a 3-position switch, if you want to record the forward direction or home point manually, do
not toggle the X2 channel switch between OFF and Home Lock position, but only between OFF and
Course Lock, or Course Lock and Home Lock position. And please record the forward direction and
home point separately so as to make sure the recording is successful.
4
We suggest you to use Home Lock in a limited area which is 10m away from the home point.
5
Continuously spinning will cause a yaw error. In this case, you can stop or slow down the spinning,
so as to have better flight performance.
6
When flying in Home Lock mode, if any of the following situations happen, then the system will quit
Home Lock flying and automatically enter Course Lock flying. The aircraft will fly in Course Lock
using the earlier forward direction
The aircraft fly’s within 10m range of the home point.
You toggle the control mode switch to the ATTI. Mode.
The GPS signal becomes bad (The GPS signal LED is blinking Red twice or three times).