24
• Device must be mounted on a strong and solid wall to bear all load of
device.
• Electrical connections of the device should be made with 3x1.5 mm
2
NYAF cable having the related approval. Use of a 2A N automate fuse is
advised.
• Inlet pressure of mains water should not exceed 6 bars. If pressure is
higher, then a pressure reducer should be added to the system.
• Device is designed for 195 V - 255 V, 50 Hz AC electrical supply. In other
cases, a voltage regulator should be used.
• Installation site of device should be a place within -10 °C and 50 °C
temperature interval and not exposed to rain.
• In case of non-compliance with general rules and commissioning or
maintenance by non-authorized persons, warranty shall be invalidated.
• Device is manufactured in accordance with AEEE and Rohs.
