1
2
OPeRaTION
35
WARNING!
No adjustments or maintenance
should be carried out unless:
the engine stopped
•
the ignition key removed
•
the parking brake activated
•
Moving Machine By Hand
8058-059
1. IZt locked into the bypass position
2. Linkage lever, engaged
Right side, IZT linkage
When pushing or pulling the mower, engage the IZt
(Integrated Zeroturn transaxle) bypass linkages. the
linkages are located on each side of the rear of the
unit below the engine plate.
Raise the deck to the highest (transport) position.
Pull the bypass linkages up and out of the keyhole
slots. Release the lever with the head outside the
bracket and held into the bypass setting.
to reengage the IZts to drive, reverse the above
procedure.
Load the machine into truck or trailer by driving up
ramps in low gear. DO nOt LIFt! the machine is not
intended to be lifted by hand.
WARNING!
Use extreme caution when loading
the machine into a truck or trailer
using ramps. There is the possibility
of serious injury or death if the
machine falls off the ramps.
