CONTROls
17
Rollover Protection system (ROPS)
the ROPS increases the basic weight of the unit by
70 lbs / 32 kg. the ROPS is an accessory.
Do not use ROPS as a lifting, attaching or
•
anchoring point.
Do not use ROPS for wrecking or towing.
•
Do not exceed Max GVW: 2822 lbs/1283 kg.
•
Read machine operator´s manual before each
•
use.
Securely fasten the seat belt when using the unit
•
with the ROPS in the upright position.
When operating with the ROPS in the folded
•
position, the seat belt should not be worn.
Where possible, avoid operating the unit near
•
ditches, embankments and holes.
Reduce speed when turning, crossing slopes and
•
on rough, slick or muddy surfaces.
Stay off slopes too steep for safe operation.
•
Watch where you are going, especially at row
•
ends, on roads and around trees.
Do not permit others to ride.
•
Operate the mower smoothly without jerky turns,
•
starts or stops.
When mower is stopped, set brakes securely and
•
use park brake.
If any part of ROPS is damaged, the entire ROPS
•
must be replaced.
Check all bolts including seat belt for correct
•
torque before each use.
Check ROPS structure for damage before each
•
use.
ROPS bar is nOt intended for use in sub zero
•
temperatures.
WARNING!
The rollover protection system's
capabilities may be impaired by
damage if the mower is overturned
or if alteration to the ROPS occurs. If
these conditions take place, the total
structure MUST be replaced.
