REV E 3/25/20
877.582.3569
29
FT7000, RACK MONITOR MANUAL 11033PA-ATEX
•
SD CARD – Replacement Part Number: 10976
The rack monitor is outfitted with an SD
card reader. The reader will accept
standard size SD, SDHC, and MMC cards.
Cards may be formatted to FAT, or FAT16.
The SD card is used to log the time that the
rack monitor changes relay states. Details
the SD log will record:
o
The time that any output relay
changes states
o
The type of sensors connected at
the time of relay change
o
Type of ground connected at time of relay change
o
TIM serial number at time of relay change
o
WET/DRY status of sensors at time of relay change
The SD card may also function as a means to update the rack monitor’s software. The current
software version is visible when powering on the rack monitor. It will show the four version
numbers sequentially in red. Zero will show as compartment 10.
Contact Dixon support to find if a newer version of the software is available.
•
OVERFILL BYPASS CARD – Replacement Part Number: 10964
GROUND BYPASS CARD – Replacement Part Number: 10978
The rack monitor comes with two overfill bypass key cards and two ground bypass key cards. For
bypass instructions refer to the ‘Bypass Procedure’ section below.