1592022010 Quick reference guide iCHILL 100CX EVO rel. 1.0
12/40
8
FIRST INSTALLING
8.1
ON
BOARD
CLOCK
(OPTIONAL)
In case of power failure the time and date are maintained for about 3 days (at room temperature 25 °C); the
display shows the message "rtC" and it is necessary to set the clock.
8.2
RTC
SETUP
1.
Push
Menu
key continuously for 3 seconds until the bottom display shows
“Hour
” and the top display
shows its value.
2.
Push
SET
one time: the value is blinking.
3.
Use the Up and Down keys to adjust it. Push
SET
one time to confirm.
4.
Push up or down keys and repeat the operations 2. 3. and 4. for all the RTC parameters:
-
Min:
minutes
(0÷60)
-
UdAy:
day of the week
(Sun
= Sunday,
Mon
=Monday,
tuE
=Tuesday,
UEd
= Wednesday,
tHu
=
Thursday,
Fri
=Friday,
SAt
=Saturday)
-
dAy:
day of the month (0÷31)
-
MntH:
month (1÷12)
-
yEAr:
year (00÷99)
9
PARAMETERS PROGRAMMING WITH TH
E “HOT KEY 64”
9.1
HOW
TO
PROGRAM
THE
INSTRUMENT
WITH
AN
ALREADY
PROGRAMMED
“HOT
KEY”
(DOWNLOAD)
1.
Power off the instrument
2.
Insert the hot key already programmed (by software Wizmate or other instrument)
3.
Power on the instrument
4.
Automatically the parameters are downloaded
During the download the regulation is locked and the top display shows the “
doL
” blinking label. At the end of
the download will appear:
•
“End”
if the programming procedure is completely OK, after 30seconds the regulation starts
automatically.
•
“Err”
if the programming procedure has found an error and the parameter have not been
transferred. In this case turn off and then on the instrument supply to repeat the operation or
remove the hot key, with power supply off, to restart the regulation.
9.2
HOW
TO
COPY
THE
PARAMETER
MAP
INTO
THE
“HOT
KEY”
(UPLOAD)
•
Power on the instrument
•
Insert the hot key
•
Enter the function Menu
