30
DiViS
www.DiViSdvr.com
5-5. Sensor
• Select sensor to use:
Enable or disable the selected sensor.
• Sensor location:
Description of the place where the sensor is located.
• Sensor type:
Select the type of the sensor.
• Connected camera:
Assign a camera that will record when the sensor is triggered.
• Check time:
Length of recovery time allocated to a sensor after it has been triggered.
• Emergency notify:
If “Remote notification of events” was enabled in “System” setup, it will automatically send
remote notification to the designated Net client software regardless of the notification schedule.
• Sensor trigger - Notification:
Choose event for sensor detection. (Refer to 5-7. Event Setup)
• Relay Information Settings
- Relay Information Settings:
Configures relay operation.
- Relay Index:
Select a Relay to configure (‘Select All’ applies the same setting to all relays).
- Relay Name:
Set Relay name (ex. Front Door Siren).
- Relay Trigger Use:
If Relay is triggered manually, it will be activated only for selected “Latch time”.
All changes will only be applied if “Save & Close” or “Apply” button is clicked.
