Divine DL-1040 DLX, Руководство пользователя

Страница: 28 / 40

28
MAINTENANCE
Pillows
Your spa is equipped with high quality polyurethane foam pillows. These
pillows can be removed by simply pulling them off. To replace them, line the
receptacle holes up with the buttons on the spa.
Spa Skirt
Divine Hot Tubs™ Deluxe uses a weather-resistant and impact-resistant material
for their exterior cabinetry. This material offers the beautiful look of tongue
and groove wood cabinetry and comes pre-stained in the color selections
provided by Divine Hot Tubs™ Deluxe.
If access to the plumbing, motors or the controller is required, remove the
screws on the service panels using a screwdriver. Panels can then be easily
removed by pulling the panel away from the spa.
The Shell
WARNING!
Do not sand
quarite
finishes.
Your Spa is constructed with a high quality, impact resistant, ther-
moplastic shell that requires very little maintenance. Make sure
that when you drain and clean your spa that you use a mild, non-
abrasive cleaner and cleaning pads. We recommend that you use
a cleaner made specifically for cleaning spas. They tend to be non-
abrasive and easy to rinse off completely.
Spa Cover
If you purchased a cover with your spa, you will want to be sure to keep it
clean and protected. Spa covers exposed to the outdoors take a beating from
the elements. Use a vinyl protectant to discourage deterioration caused by
the UV rays from the sun. This will also minimize rain penetration.
Once a month, take the cover off the spa and use a sponge and dish soap to
scrub the cover clean. Keeping the cover free of dirt and debris is the most im-
portant maintenance task for the cover. Be sure to clean the seams extra well.
Your cover comes with screws that are used to fasten the receiving end of the
strap locks. Simply align the cover on the spa and stretch out the straps until
they are tight. Mark the location of the strap receptacles, then fasten them to
the spa skirt with the screws supplied.