Divine DL-1040 DLX Скачать руководство пользователя страница 16

Страница: 16 / 40

Diagnostic messages

MESSAGE

MEANING

ACTION REQUIRED

No message on display.

Power has been cut off to

the spa.

The control panel will be

disabled until power returns.

Settings are preserved until the

next power-up.

0XX

(OHH)

“Overheat” - The spa has

shut down. One of the

sensors has detected 118°F

(approximately 47.8°C) at

the heater.

Remove the spa cover and

allow water to cool. Once the

heater has cooled, reset by

pushing any button. If spa does

not reset, shut off the power to

the spa and contact customer

service for assistance.

0XS

(OHS)

“Overheat” - The spa has

shut down. One of the sen-

sors has detected that the

spa water is 110°F (approxi-

mately 43.3°C).

DO NOT ENTER THE WATER.

Remove the spa cover and

allow water to cool. At 107°F

(approximately 41.7°C), the spa

should automatically reset. If

spa does not reset, shut off the

power to the spa and contact

customer service for assistance.

(ICE)

“Ice” - Potential freeze

condition detected.

No action required. The pumps will

automatically activate regardless of

spa status.

(SnA)

Spa is shut down. The

sensor that is plugged into

the Sensor “A” jack is not

working.

If the problem persists, contact

customer service for assistance..

(May appear temporarily in an

overheat situation and disappear

when the heater cools.)

(SnB)

Spa is shut down. The

sensor that is plugged into

the Sensor “B” jack is not

working.

If the problem persists, contact

customer service for assistance.

(May appear temporarily in an

overheat situation and disappear

when the heater cools.)

SnS

(SnS)

Sensors are out of balance.

If this is alternating with the

temperature, it may just be

a temporary condition. If the

display shows only this mes-

sage (periodically blinking),

the spa is shut down.

If the problem persists, contact

customer service for assistance.

XFL

(HFL)

A substantial difference

between the temperature

sensors was detected.

This could indicate a flow

problem.

Check water level in spa. Refill if neces-

sary. If the water level is okay make

sure the pumps have been primed.

If the problem persists, contact cus-

tomer service for assistance.

Содержание DL-1040 DLX









































Результаты поиска

Содержание DL-1040 DLX

Отзывы:

Похожие инструкции для DL-1040 DLX

Бренды по названию

Популярные бренды

Divine DL-1040 DLX, Руководство пользователя

Результаты поиска

Содержание DL-1040 DLX

Отзывы:

Похожие инструкции для DL-1040 DLX

Бренды по названию

Популярные бренды