DITECH DT5648, Инструкция по эксплуатации

Страница: 26 / 36

26
Device overview
ENG
DEU
ference cannot be completely excluded. Interference can be caused e. g.
by switching processes, electric motors or defective electric appliances.
The range inside buildings can be strongly different from the
range in open air.
4 Device overview
(see fig. 2 page 3)
(A)
Fixing lug
(B) Connection terminal for switched phase (1)
(C) Connection terminal for neutral conductor (N)
(D) Connection terminal for phase (L)
(E) Device LED
4.1 Technical Data
Short designation of the device DT5648
Supply voltage 230 V / 50 Hz
Max. power consumption 5 A
Standby power consumption 0.2 W
Max. switching power 1150 W
Load type ohmic load, cosφ ≥ 0.95
Relay closing contact, 1-pole, μ-contact
Line type and line section rigid and flexible line, 0.75-1.5 mm²