DITECH DT5648, Инструкция по эксплуатации

Страница: 31 / 36

31
Commissioning
DEU
ENG
5.2 Teach-in of the device
Prior to operating the UP-Switch Actuator and meter, it must be integrat-
ed into the DITECH Smart Home iL system via the DITECH Smart Home iL
central unit (DT5637). For this, teach-in the respective device as follows.
Ö The DITECH Smart Home iL central unit has been set up via the DITECH
Smart Home iL app.
Ö The UP-Switch Actuator and meter is assembled and installed.
1. Open the DITECH Smart Home iL app on your smart phone.
2. Select the menu item Teach-in device.
After assembly and installation, the teach-in mode is active for
three minutes after switching on the mains voltage. The teach-in
mode can be activated manually by switching the mains voltage
on and off.
3. The device will be displayed automatically in the app.
4. For confirmation of the teach-in process, enter the last four digits of
the device number (SGTIN) in the app or scan the supplied QR code.
The device number can be found on the back side of the device.
The LED will light up in green after a successful teach-in process.
The process must be repeated if the LED lights up in red.
5. Follow the directions of the DITECH Smart Home iL app.