DITECH DT5640, Инструкция по эксплуатации

Страница: 38 / 44

ENG
DEU
38
DEU
Displays
ENG
6.2.1 Connection test
During this verification the room control unit Analog sends a switching command
to the base station. Depending on the switching status the assigned heating zone
has, it will be switched on or off after receiving the command.
1. Remove setting wheel (E).
2. Press the Set button in order to perform a radio test.
7 Displays
7.1 Status indications
Display Meaning Solution
1 x long illumina-
tion in green
Process confirmed Process with the set-up/operation.
Short flashing in
orange
Radio transmis-
sion/transmission
attempt/data trans-
mission
Wait until the transmission has
finished.
1 illumination in
orange and 1 in
green (after insert-
ing batteries)
Test indication After the test indication has gone
out, proceed with the set-up/op-
eration.