manualshive.com logo in svg

Ditch Witch ht25, Руководство по обслуживанию, Страница: 44 / 103

Поделиться
Скачать
Ditch Witch ht25 Скачать руководство пользователя страница 44

44

HT25 - TRANSPORTATION

TOW

44

HT25 - TRANSPORTATION

TOW

TOW

Incorrect procedures could result 

in death, injury, or property damage. Learn to use 
equipment correctly.

Under normal conditions, unit should not be towed. If unit 
becomes disabled and towing is necessary:

•

tow for short distances at less than 1 mph (1.6 km/h),

•

do not tow for more than 200 yd (183 m),

•

steering will be through tow vehicle only.

1.

Attach tow line to tiedown points nearest the towing vehicle.

2.

Fasten seat belt and begin towing.

IMPORTANT: Tracks will not move.

3.

Use tow vehicle or other lifting device to load unit onto trailer.

sf1027

TOW

Incorrect procedures could result 

in death, injury, or property damage. Learn to use 
equipment correctly.

Under normal conditions, unit should not be towed. If unit 
becomes disabled and towing is necessary:

•

tow for short distances at less than 1 mph (1.6 km/h),

•

do not tow for more than 200 yd (183 m),

•

steering will be through tow vehicle only.

1.

Attach tow line to tiedown points nearest the towing vehicle.

2.

Fasten seat belt and begin towing.

IMPORTANT: Tracks will not move.

3.

Use tow vehicle or other lifting device to load unit onto trailer.

sf1027

Содержание ht25








































































































Отзывы:

Нет отзывов