Ditch Witch ht25 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 103

Ditch Witch ht25 Скачать руководство пользователя страница 35

HT25 - TRACTOR

35

DAILY INSPECTION

HT25 - TRACTOR

35

DAILY INSPECTION

TRACTOR

DAILY INSPECTION

For efficient use of your machine, do the following before each
day's work.

•

Check general appearance of tractor and attachments. Look
for loose, worn, or damaged parts and fluid leaks.

•

Check condition of all wear items such as fan belts, etc. Check
condition of attachment wear items.

•

Check fuel level.

•

Check that all signs, guards, and shields are in place and
readable.

Service machine according to schedules in LUBRICATION and
MAINTENANCE and in engine manufacturer's guide.

Incorrect procedures could result

in death, injury, or property damage. Learn to use
equipment correctly.

NOTICES:

•

Read operator's manual before operating equipment. Follow
instructions carefully. Contact your Ditch Witch dealer for
operation information or demonstration.

•

Wear hard hat, safety glasses, and other protective gear
required by job. Do not wear jewelry or loose clothing that can
catch on controls.

sf1027

TRACTOR

DAILY INSPECTION

For efficient use of your machine, do the following before each
day's work.

•

Check general appearance of tractor and attachments. Look
for loose, worn, or damaged parts and fluid leaks.

•

Check condition of all wear items such as fan belts, etc. Check
condition of attachment wear items.

•

Check fuel level.

•

Check that all signs, guards, and shields are in place and
readable.

Service machine according to schedules in LUBRICATION and
MAINTENANCE and in engine manufacturer's guide.

Incorrect procedures could result

in death, injury, or property damage. Learn to use
equipment correctly.

NOTICES:

•

Read operator's manual before operating equipment. Follow
instructions carefully. Contact your Ditch Witch dealer for
operation information or demonstration.

•

Wear hard hat, safety glasses, and other protective gear
required by job. Do not wear jewelry or loose clothing that can
catch on controls.

sf1027

«
...
33
34
35
36
37
...
»

Содержание ht25








































































































Отзывы:

Нет отзывов