92
Connecting the Phone Line
Chapter 12
Phone System Setup
You must also set up the receiver for your telephone system (touch tone or rotary). If you
need a prefix to make an outside call, set a telephone number prefix.
1
Press MENU on the remote control, then select
System Setup
,
Installation
, and then
Phone System
.
2
Select the
Touch Tone
or
Rotary Phone
option in the Phone Type list.
3
Select the
Prefix Code
option under Outside Line if you need to dial a prefix to make
outside calls. Otherwise, leave this setting on
No Prefix
.
Note
: Usually, you need a telephone number prefix only for business installations. For
most residential installations, all you need to do is set the telephone system type. The
default setting of No Prefix will allow correct dialing. If this is the case, select the
Save
option to save the above setting, and stop here. If you do need to set a prefix, then instead
of selecting the
Save
option, go on to step 5.
4
If you selected
No Prefix
, select
Done
.
5
If you selected
Prefix Code
, the receiver highlights the box where you must enter the
exact sequence you dial to reach an outside line.
6
Select
Done
.
