14
7. Press the blank
POWER
button to turn the device
back on.
8. Try some other buttons to make sure they work.
Sometimes, the blank
POWER
button works when
other buttons don’t.
P
ROGRAMMING
THE
R
EMOTE
TO
C
ONTROL
A
S
ECOND
S
ATELLITE
R
ECEIVER
If you have another DISH Network satellite receiver installed, you can
use this remote in
AUX
mode to control the second receiver. You can
program the remote to control any other DISH Network satellite
receiver, except for following:
•
DISH 322 - TV2
•
DISH Player-DVR 522 - TV2
•
DishPlayer 7100/7200
1. Turn on the other receiver and display the
System Info
screen (see
the user’s guide for information on how to display the screen).
Write the address: _____________
2. Press and hold
AUX
until all the other mode buttons light
up, and then let go of the button.
AUX
flashes.
3. Press the 3 button.
4. Use the
NUMBER PAD
to enter the address you wrote in step 1.
5. Press
POUND
(#).
AUX
blinks three times.
6. Press
RECORD
to make sure the address and the remote
matches the address on the receiver
C
HECKING
THE
D
EVICE
C
ODES
You can find out what device code you’ve set for each remote control
mode.
1. Press and hold the mode button for the device you want the remote
to control, for about three seconds. When all the other mode
buttons light up, let go of the mode button - that mode button
should now be flashing.
For example, hold the TV mode button for a TV until all of the
other mode buttons light. When you let go, the TV mode light will
flash.
Pyramid.book Page 14 Wednesday, February 16, 2005 4:00 PM
