21
8.8 LYNK Network
8.8.1 Network Layout
LYNK-enabled
Device 2
LYNK-enabled
Device 1
LYNK-enabled
Device 3
8.8.2 Network Installation
Networking Guidelines:
•
Separate data and power cables.
Allow for separation between data
and power cables. Avoid data interference caused by running network
cables bundled with power cables.
•
Allow for LYNK Network cable slack
. Ensure that LYNK Network cables
are slack and not in tension.
•
Isolate the LYNK Network
. Do not mix other networks with the LYNK
Network.
NOTICE
Mixing the LYNK Network with other networks may result in equipment malfunction and
damage.
NOTE
Termination resistors are not required when networking with the LYNK Network.
1. Mount the devices according to
their installation instructions before
beginning network installations.
2. Attach the
950-0038 DLP T Connector
to each battery. Ensure that the
mating connectors are securely
fastened.
Figure 10. Network Layout.
Figure 11. 950-0038
DLP T Connector.
