15.
Consider where to install push button/microphone. Keep in mind the
control button must be within drivers reach and facing for voice
commands and phone dialog (cable is 6ft. long).
We recommend
completing the rest of the install prior to securing the
control/mic button to the dash.
Once you decide on a location simply
remove tape backing from control /mic button
Make sure no ventilation duct is pointed towards the mic.
It is best to mount button facing driver
The Bluetooth module includes a USB charging port. An optional USB extension
cable kit is available. Should you decide to purchase/install, we suggest one of 2
connecting options:
A
.
Flush to dash/panel
requires drilling a ¾” hole in the dash
B
.
Flush with Support bracket
(use this option to mount USB terminal
wherever your installation demands without drilling)
A.
Flush to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel
using a step drill bit or equivalent
(See
Fig. 11
)
Fig. 11
Step drill bit
2.
Insert male end of the 3ft. USB cable (See
Fig. 12
) through
¾” hole
created in step 1 and connect to USB port on module (See
Fig. 13
)
Fig. 12
Flush mount 3 ft. USB cable
Fig. 13
Module USB port
3.
Snap USB head (See
Fig. 14
) to panel until flush with mounting surface
(See
Fig. 15
)
