Fig. 14
Flush mount USB Terminal
Fig. 15
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and test operation
(See
Enabling the AUX
section below)
B.
Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of radio and secure
USB support bracket (See
Fig. 16
) using adhesive/tape or screws.
Fig. 16
USB mounting bracket
2.
Insert USB cable through hole in bracket (See
Fig. 17
) and connect to
Module USB port (See
Fig. 13
)
Fig. 17
3.
Snap USB head to panel until flush with mounting surface (See
Fig. 18
)
Fig. 18
4.
Tuck and secure any extra wire away from moving parts and test operation
(
See Bluetooth Pairing and Connection
)
USB port supports charging only. Use your own USB charging cable or
proceed to next step if charging is not required.
Warning:
Radio cavity in most vehicles may lack extra room needed
to fit aftermarket equipment and because of that you will have to be
creative when fitting this part. Extra length cables are provided to
allow for flexibility
Secure module and proceed to section next section.
