4.
Remove the (4) 10mm screws securing radio to the dash (See
Fig. 3
)
Fig. 3
5.
Pull radio forward to reveal the connectors (See
Fig. 4
)
Fig. 4
Radio connectors
6.
Disconnect factory 8-pin
gray
plug from radio (See
Fig. 4
)
7.
Connect factory 8-pin
gray
plug to installation harness 8-pin connector
(See Fig.
5
)
Fig. 5
8.
Connect installation harness 8-pin plug (black) (See
Fig. 6
) to radio
chamber vacated in step 6.
Fig. 6
9.
XM subscribers
:
Connect installation harness right angle
3.5mm plug
(See
Fig. 6
) to module
pigtail female jack as seen in
Fig. 7
10.
Connect installation harness straight
3.5mm plug
(See
Fig. 6
) to module
3.5mm input
jack labeled “XM”
(See
Fig. 8).
Proceed to step 13
11.
Non-subscribers:
Connect installation harness right angle
3.5mm plug
(See
Fig. 6
) to module
pigtail female jack as seen in
Fig. 7
