t
Reflex Duplicator Manual
- 9 -
The number of partitions is determined by dividing your Hard
Driveís total capacity by 1GB for CD format, 5GB for DVD-5
format or 9GB for DVD-9 format (Double Layer) and
subtracting one partition for system use.
The following steps will show you how to load your master
disc into the installed Hard Drive as a disc image and copy the
stored disc image into several blank discs. This process is
recommended for large volume production.
How to make copies from the Hard Drive?
When you turn on your duplicator, after it has booted up, you
should see the following signifying your duplicator is ready.
1.
Make sure the Master Reading Source is set to the Hard
Drive.
It is very important to make sure the Master Reading Source
is set to the Hard Drive in order to avoid unnecessary error
messages. To check the Master Reading Source, please do
the following:
a.
Press Source button below the display and you
shall see the following:
DISCMAKERS 1.12
1.COPY
Drive 1 Port 1.0
Optiarc DVD R AD5170A
t
Reflex Duplicator Manual
- 10 -
b. Scroll up to this screen:
c. Press ENT
d. The screen should go back to:
2.
Copying From the Hard Drive
a.
Insert desired number of blank media
Hard Drive Port 0.0
Hitachi HDT725025UL
Discmakers 1.12
1. Copy
DISCMAKERS 1.12
1. Copy
Hard Drive Port 0.0
Selected!
