t
Reflex Duplicator Manual
- 19 -
When you turn on your duplicator, after it has booted up, you
should see the following signifying your duplicator is ready.
1.
Press “Source“ hot key to navigate to Select Source Menu.
2.
Enter Source Selection Menu.
Press “ENT“ button to enter into Source Selection Menu.
You shall see the following:
Select Desired Master Reading Device.
You can press UP or DOWN button to select the desired
Master Reading Source. Then, you can press “ENT“ to
submit your Source Selection.
3.
Once your selection has been changed successfully, you
shall see the following screen for 2 seconds:
Disc Makers 1.12
1. COPY
Hard Drive Port 0.0
Hitachi HDT725025UL
Hard Drive Port 0.0
Selected!
Setup
5.2 Select Source
t
Reflex Duplicator Manual
- 20 -
Then you will be directed back to the menu:
After loading your master disc to the Hard Drive,
please make sure to remove your master disc from
the Master Reading Tray. Failure to do so might
cause improper duplication.
NOTES
DISCMAKERS 1.12
1.Copy