Elite MicroPrint
Setup Guide
7
(FireWire to PC Connection is not used on the Elite MicroPrint)
Customer Minimum Hardware and Software Requirements
Desktop systems change rapidly and the Elite MicroPrint was designed for use with PC
systems that are relatively new models. It is recommended that you operate your new Elite
MicroPrint with the best possible hardware. This will ensure you a recording and printing
system that will operate smoothly and efficiently.
The following are minimum requirements for the PC to which the Elite MicroPrint is to be
connected. These are very important.
Minimum PC Requirements:
1.0GHZ Celeron® Processor or equivalent
128MB RAM
Free External Com Port (for RS232 to autoloader)
Free Parallel Connection (for CD printer)
Software Requirements:
Windows 2000 or Windows XP
Parallel - Printer
Serial - Autoloader
AC Power
MicroElite
Adapter Guide
InkJet Printer
AC Power
Printer Control
Customer PC
Printer Port
Com Port
Installation and Support CD
Printer Driver CD
Discus Labeling Software
CD Drive
Connection Block Diagram
MicroElitePrint Kit
