Elite MicroPrint
Setup Guide
19
Step 5
Installation of Labeling Software
You will need to install the label making software included with the kit.
Locate the Discus CD Labeling Software CDR and insert into your CDROM drive on the PC
that is connected to the Elite MicroPrint. The menu below will be displayed,
choose
Install to Hard Disk
.
NOTE: Be sure that your PC can handle the 500MB and not affect the minimum requirements
of the Elite MicroPrint hardware.
When the Discus Labeling Software begins to install, it will first load Apple QuickTime onto
your PC. Follow the instructions on the installation. When the screen asks to register the
QuickTime, simply click on Proceed without entering anything.
Once the Discus installation is complete, a Discus LE icon will be placed on your desktop.
Click on the DiscusLE icon and verify that the Discus installed correctly. Close Discus and
remove the CDROM.
