Elite MicroPrint
Setup Guide
20
Turn on your Elite MicroPrint Unit
Ensure that all the cables are properly connected. Turn on the Elite MicroPrint by flipping the
power switch located on the rear of the unit. You are now ready to start printing CD/DVDs.
Step 6
Load Blank CD’s and Start
You are now ready to begin a job or task on the Elite MicroPrint. Turn on your unit if you have
not already done so. Refer to the previous page if necessary. The next steps will take you
through a typical setup and usage of the Elite MicroPrint. It is recommended to follow these
steps and produce a test job, then move on to the many other functions and features of the
Elite MicroPrint.
Load blank Ink Jet media, data side down, onto the input spindle. The input spindle has three
silver rods located around the outside edge of the media. Please be sure the media does not
stick together and that the media lays flat in the input spindle.
On the Desktop, click on DiscusLE
