Disaster Area Designs DMC.micro, Руководство пользователя

Страница: 7 / 12

of 7 12
(setting up the DMC.micro, continued)
EVENTIDE (H9, SPACE, TIMEFACTOR, MODFACTOR, PITCHFACTOR)
Eventide devices have a robust MIDI mapping capability, but none of their functions are set from the factory. In order for these
devices to recognize the commands we send, a few parameters must be set in their MIDI menus
If using H9 Control, navigate to Pedal -> MIDI Settings -> MIDI Channel
Set MIDI Receive Channel match device selection - 1 for DevA, 2 for DevB, etc.
Navigate to Pedal -> MIDI Settings -> Assign MIDI CC Messages.
Map Tap Tempo to MIDI CC 44
Map Performance Switch to MIDI CC 46
Map Toggle Tuner to MIDI CC 69
Map Activate to MIDI CC 42
Map Set Expression Pedal Value to CC 48
If using the MIDI menu on the device itself:
Navigate to RCV CHANNEL and set to match device selection - 1 for DevA, 2 for DevB, etc.
Navigate to the RCV CTL menu and set the following
TAP C42
HOTSW C46
ACTIVE C42
PEDAL C48
If you plan to use the looper on the H9 or Timefactor, set the following:
Looper - Record MIDI CC 87
Looper - Play MIDI CC 86
Looper - Stop MIDI CC 85
Looper - Empty MIDI CC 90
Looper - Flip Direction MIDI CC 94
Looper - Flip Octave MIDI CC 95
BOSS DD-500
Most of the default settings for the DD-500 are correct, but you will have to set up a few things to get the DD-500 to talk to the DMC
Gen3. The DMC Gen3 sends the MIDI command to activate CTL1 when its Tap Tempo is activated, and CTL using the Performance
Switch / Latching command.
To set the DD-500 to receive on a channel other than 1 (default) press Edit to enter the Edit menu.
Navigate to MIDI, then set Rx CHANNEL to the desired setting. If you want the DD-500 as the “B” device, then this should be set to 2,
“C” device is 3, etc.
Ensure that PC IN and CC IN are both set to ON. The remaining settings should be correct.
To set up the DD-500 to receive tap tempo, press Edit to enter the Edit menu. Navigate to CONTROL, then set CTL1 Func to TAP.
Set CTL1 PREF to SYSTEM to enable tap tempo in all presets.
Disaster Area Designs DMC.micro Gen3