Dirty Hand Tools 100983, Руководство по эксплуатации

Страница: 9 / 28

2. Attaching the Wheels
To place wheels in tilling position. (See Figure)
1. Slide wheel
1
onto axle.
2. Align hole in axle with hole in wheel hub.
3. Insert lynch pin
2
through holes, fold lock pin ring to secure pin.
4. Firmly lock wheel and axle together before tilling.
4. Repeat for other wheel.
NOTE: Always have both wheel lock pins in or out. Do not
operate tiller with only one wheel locked.
To place wheels in free-wheel position.
1. Remove lynch pin. Slide wheel inward toward machine.
2. Insert pin in axle only.
3. Wheel should turn freely on axle.
NEVER START ENGINE OR OPERATE TILLER WITH
WHEELS IN FREE-WHEEL POSITION.
The free-wheel position is for transporting the tiller long
distances over level ground-do not attempt to move the tiller up or
down steep grades in the free-wheel position.
9
!
WARNING
Item # Part # Description Qty.
1 100879 Wheel, Right 13 x 5-6 1
100907 Wheel, Left 13 x 5-6 1
2 101221 Lynch Pin, 5/16” x 1-3/4” 2
3 100884 Retaining Ring, 1” 2
Position the lock pin in the
axle holes only to permit
free wheel turning.
1
2
3