Dirty Hand Tools 100983, Руководство по эксплуатации

Страница: 16 / 28

16
Maintenance
THE TILLER TRANSMISSION IS SHIPPED FROM
FACTORY WITH THE CORRECT AMOUNT OF
LIQUID GREASE.
• Keep tiller, safety shields and covers, attachments, and accessories
in safe working condition.
• Check shear bolts, engine mounting bolts, and other bolts at
frequent intervals for proper tightness to be sure the equipment is
in safe working condition.
• To prevent accidental starting, always disconnect and secure the
spark plug wire from the spark plug before performing tiller
maintenance.
• Never run the engine indoors. Exhaust fumes are toxic.
• Always allow muffler to cool before filling fuel tank.
• Never store equipment with gasoline in the tank inside of a closed
building where fumes may reach an open flame or spark. Allow
the engine to cool before storing in any building.
• Always refer to the operator’s guide instructions for important
details if the tiller is to be stored for an extended period.
• Add a fuel stabilizer to gas tank and run for 10-15 minutes
to prevent fuel from gumming up during an extended storage
period.
Lubrication
Proper lubrication of moving mechanical parts is critical for proper
care and maintenance. Oil the moving parts at 10 hour intervals
using a 30 weight oil.
Cleaning the Tine Axle Shaft
1. Turn off engine. Engine must be cool.
2. Remove spark plug wire and secure from spark plug.
3. Tip the tiller forward. Block the tiller in position so that it rests
on the engine mount and the tines are exposed.
4. Remove all vegetation, string, wire, and other material that may
have accumulated on the axle between the inside set of tines and
the seal on the transmission housing.
5. Tip the tiller back to a level position.
6. Replace spark plug wire.
!
WARNING