background image

3

 WARNING 

•  Don’t attempt to remove blockages  

  with sharp objects as this may  

  cause damage to the vacuum  

  cleaner, remove blockages only as  

  instructed in this guide.

•  Don’t use the vacuum cleaner with  

  incorrect voltage as this may result  

  in damage or injury to the user. 

  The correct voltage is listed on the  

  ratings label.

DON'TS CONTINUED...

•  Turn off all controls on the vacuum  

  cleaner before disconnecting or  

  connecting the plug from the 

  mains socket.
•  Always keep the power cord away  

  from brushes during use.
•  Always make sure both the    

  pre-motor/post-motor filters are

  in place before use.
•  Take extra care when using the  

  vacuum cleaner on the stairs.
•  Always switch off the vacuum  

  cleaner before disconnecting or  

  connecting the reach wand and  

 accessories.
•  Keep all openings clear and free  

  from debris as this may affect the  

  airflow/suction.
•  Always replace the fuse in the plug  

  with a British 13amp fuse. 
•  Always protect the power cable  

  from heated surfaces and open  

  flames.

•  Use only CE approved 13amp  

  extension cords, non-approved  

  extension cords may overheat.  

  Care should be taken to arrange  

  the extension cord as it can be a  

  trip hazard.
•  Store the vacuum cleaner in a cool,  

  dry area. If the filters have been  

  cleaned as per user the guide  

  instructions ensure they are   

  thoroughly dry before storing away.
•  Take extra care when using the  

  vacuum cleaner on the stairs
•  Use only CE approved 13amp  

  extension cords, non-approved  

  extension cords may overheat.  

  Care should be taken to arrange  

  the extension cord as it can be a  

  trip hazard.

PLEASE KEEP INSTRUCTIONS 

FOR FURTHER USE.

DO'S

Содержание 360 REACH DDU03-E01





















Отзывы: