For best cleaning results, filters should be tapped over a bin every
4-6 uses to remove dirt and debris and washed every 3 to 6 months.
CAUTION
7
11
H
O
W
TO
Top view
of Pre-Motor
filter
CLEAN THE PRE-MOTOR FILTERS
1. Press the dirt container release
button, pull the dirt container
to remove.
2. Twist clockwise and pull filter
frame out.
3. Separate the pre-motor filter.
Tap filters over a bin to remove
any dirt/debris. Wash the filters
under running water (40° max).
4. Leave for 24hrs or until fully dry
before replacing.
5. Line up the pre-motor filter with
the tabs in the dirt container.
Twist anti-clockwise until the
filter locks into place.
6. Tilt the dirt container and line up
onto the handheld. Push the dirt
container into handheld until the
tab on the dirt container clicks
into place.
24hr
