This vacuum cleaner has a constantly rotating brushbar when
carpet mode (II) has been selected . When turned on never leave
the vacuum cleaner in one spot for an extended period of time as
this may damage the floor surface. The power head brush should
be ON (II) for carpets and OFF (I) for hard floors.
CAUTION
7
9
TOOL
S
USE AS A STICK VACUUM CLEANER
2. Slide the On/Off and
brushbar control -
0
= Off
I
= The brush on the powered
head will NOT spin - for hard
floor cleaning
II
= The brush will spin and a
green light on the powered
head will illuminate - for
carpet cleaning
1. Plug into the mains and place
your foot on the powered head.
Pull the handle backwards
to recline.
3. Slide the air vent open on
the reach wand to reduce
suction if required.
LOCK THE POWERED HEAD
INTO POSITON (OPTIONAL)
Position the wand and powered
head to the preferred cleaning
angle. Push the eco lock towards
the neck of the powered head to
lock position. This will make the
neck of the powered head less
flexible.
TIP: For most efficient results, the air
vent should be closed.
