DirecTV HIRD-B2, Руководство пользователя

Страница: 15 / 92

P
AGE
2-1
Setting up your new DIRECTV System is much easier than assembling a train set or a bicycle. You
should be watching satellite programming in a very short time!
This chapter provides step-by-step instructions for setting up your DIRECTV System and connecting it
to your television or entertainment system. As you are reading this now, it is assumed that you have
already opened and unpacked the box.
The receiver carton includes the receiver itself, an Access Card (already installed in the receiver behind
the door), a remote control with two AA batteries, cables, and this manual. Contact your dealer if any
part is missing or damaged. Please save all packing materials until the installation of your system is
complete in case anything needs to be returned.
You now need to decide where you want to place your digital satellite receiver. Avoid installing the
receiver in a location where the power cord or cables could be inadvertently disconnected. Obviously,
choose a place near your TV. The location should also be well ventilated. Do not set electronic
components or other objects (including this manual) on top of the receiver or otherwise block its
cooling vents.
It is recommended that you have your dish professionally installed. This is due to safety issues,
electrical codes, and assurance of a quality installation.
If you should choose to perform the
installation yourself, please pay special attention to the precautions in the front of this manual
and refer to the chapter “Installing and Pointing Your Satellite Dish."
You may also want to
obtain the Do-It-Yourself Installation Kit , sold separately.
Installing Batteries in Your
Remote Control
Before you can use your remote control, you must install the supplied AA batteries. First, unsnap the
battery cover from the back of the remote control. Install each fresh
battery as shown, making sure that the + and - on each battery line
up with the marks in the battery compartment. Next, snap the cover
back onto the remote control.
Refer to “Programming Your Remote Control” for setting the codes
to control the devices in your entertainment system.
SETTING UP YOUR
DIRECTV SYSTEM
2
Battery installation