DirecTV HIRD-B2, Руководство пользователя

Страница: 12 / 92

HUGHES-BRAND DIRECTV SYSTEM OWNER’S MANUAL
P
AGE
1-4
The rear of the receiver has numerous jacks for connection to your audio/video entertainment system.
You will also find the power cord permanently connected to the back.
The
SATELLITE IN
F-type jack is for connecting the cable from your satellite dish to your digital
satellite receiver. Be sure that you use RG-6 cable only.
The
IN FROM ANT
F-type jack is an input where you can connect the cable from an RF terrestrial
source such as an off-air antenna or cable TV service.
The
OUT TO TV
F-type jack is an RF output which you may connect to your TV or VCR (depending
on your entertainment system). Note that the CH3/CH4 switch on the upper left enables you to select
the channel for your TV on which the satellite programming appears.
The phono-type AUDIO output jacks, labeled and color coded (
L
is white,
R
is red) to indicate left and
right, can be used for connection to your TV, VCR, or audio system. The HIRD-B2 and HIRD-C2
model receivers has one pair, while the HIRD-B3 and HIRD-B4 models have two pairs.
The phono-type composite
VIDEO
output jack is color coded in yellow. You may use this jack for
connection to your TV or VCR. The HIRD-B2 and HIRD-C2 model receivers has one video jack,
while the HIRD-B3 and HIRD-B4 models have two video jacks.
The multiple pin
S-VIDEO
jack is for high quality output of video. You should use this jack to achieve
the clearest picture for your TV or VCR. Only newer high-end TVs, SVHS VCRs and Hi8 VCRs
support S-video type connections.
The 15-pin
WIDE BAND DATA
port, available only on the HIRD-B3 and HIRD-B4 model receivers,
is intended for advanced applications such as broadcast data services when available. Do not attempt to
use this connector without an Hughes-approved data cable or adapter.
The 9-pin
LOW SPEED DATA
port, available only on the HIRD-B4 model receiver, is also intended
for advanced applications such as broadcast data services. Do not attempt to use this connector without
an Hughes-approved data cable or adapter.
The standard RJ-11 modular
PHONE JACK
is for connecting your digital satellite receiver to your
phone line. This phone connection is necessary to access certain program offerings from your service
providers. Any calls generated by the digital satellite receiver are toll free. The telephone line
connection will not normally interfere with your telephone operation. On occasion, the receiver will
call a toll-free number briefly to report any pay per view programs that may have been purchased.
The
VCR CONTROL
mini-jack, found on receiver models HIRD-B3 and HIRD-B4, is for connecting
the VCR control cable that is included with the system. With this cable, your satellite receiver can
interface with most popular brands of VCRs to record selected programs automatically.
The
D-VHS
jack, found only on the HIRD-B4 model receiver, is for connecting a digital A/V cable
(not included) for use with a D-VHS VCR. When this cable is connected and a functioning D-VHS
VCR is attached, the previously mentioned VCR CONTROL cable will not be utilized.