Direction-
Plus™
PLPV621DPK_Install
Page | 5
Pre-assembled Provent 150 with bracket.
7.
Use the supplied cable ties to secure the 12mm hose into the location required under the vehicle to prevent movement.
Note: Leave a slight amount of slack in the line where the body and chassis join to prevent stretching the hose.
8.
Make sure the tap position is closed and avoid placing the tap in a location in which it will fill with dirt and mud.
Left image
–
Tap Open.
Right image
–
Tap Closed.
Hose from engine
Hose to air intake
Connect 12mm
drain Hose Here
PL150DP Pre-filter
mounting location
