Direction-
Plus™
PLPV621DPK_Install
Page | 4
Hose tail and tap assembly inserted into 12mm hose, hose clamp not required
6.
Fit the new bracket / ProVent® 150 bracket assembly onto the two mounting locations. Using the original M6 nut to
secure the end behind the fuse box. Once this is tight, use the supplied M8 nut to secure the other end of the bracket to
the stud between the air conditioning lines. We recommend the use of Loctite thread locker here.
Top down view: Ranger PX Engine Bay-
Passenger’s
Side
Supplied M8
Nut securing
bracket to stud.
Original M6
Nut reused
PL150DP Pre-filter
mounting location
Hose from engine
