Direction-
Plus™
PLPV621DPK_Install
Page | 1
Ford Ranger PX Direction Plus™ ProVent® 150 and PreLine-Plus
Installation Guide
This document is to be used as a guide for the installation of the
Direction Plus™
Ranger PX ProVent® 150 Crankcase Ventilation
unit and PL150DP pre-filter Kit to a 2011-2016 Ford Ranger PX & PXII 3.2 & 2.2 Diesel. It is recommended that the installation of
the product be carried out by a competent qualified mechanic.
Important before starting
•
Ensure the engine bay is clean and free from contaminants
•
The filter head has direction arrows indicating the direction of flow
•
You have the correct tools to complete the fitment
•
Read the instructions in full and familiarize yourself with the installation before commencing any work
Included in the kit
RPXPV150-BR
1
PROVENT 150
1
19MM ELBOW CONNECT
2
SPRING CLAMP - 19MM
6
CABLE TIE
8
FLAT WASHER M8
4
NYLOC NUT M8
3
PROVENT KIT TAP
1
HOSE CLAMP - 12MM SPRING
2
FUEL LINE 10MM
1
BOLT KIT 10MM
1
9.89 ELBOW QD
2
DFL10 - FUEL LINE RUBBER (10MM)
1
BOLT M8X25
2
HOSE CLAMP 10MM
2
WINDSCREEN LABEL
1
PV ENGINE BAY LABEL
1
PL ENGINE BAY LABEL
1
HOSE 19MM
0.65
HOSE 19MM
0.65
HOSE 19MM
0.07
M16X1.5 ADAPTER
–
10MM
2
WATER ALARM KIT
1
PL150DP ASSEMBLY
1
PUSH ON 90 DEG - 10MM
2
16MM FLAT WASHERS
2
*Kit contents are subject to change based on component availability and/or refinement
Installation Guide
1.
Begin by removing the engine cover to give access to the crankcase bypass hose in the front passenger corner.
Approximate mounting location
location
