26
entry delay on/off
z
On: If the system has passively armed, it will not trigger for
15 seconds after a door is opened allowing the user to enter
the vehicle and disarm the system via the PlainView 2 Valet
switch.
z
Off: There is no entry delay when armed. The system will
trigger instantly when a door is opened.
reset all features to factory settings
z
All system settings (except PIN and remote programming) in
the User Programming grid will be reset to their default fac-
tory setting as indicated in bold lettering.
z
Press the arm/disarm button of the TX; the siren will chirp
twice as confirmation.
auto start setting - off/battery only/temp only/battery and temp
z
This feature is only available with the IntelliStart* option.
z
Off: The vehicle will not autostart.
z
Battery: The vehicle will only autostart when the car battery
voltage has dropped to a preset level.
z
Temperature: The vehicle will only autostart at a preset low
temperature.
z
Battery and temperature: The vehicle will autostart with a
low voltage car battery or low temperature.
* This feature is not evaluated by Thatcham
nnoottee:: Temperature and battery calibration settings can only be made
with the Cliffnet Wizard programming software.
