28
accessory b output
The transmitter channel programmed into this feature will activate the
accessory output.
silent mode
The transmitter channel programmed into this feature will arm/disarm
the system, but the siren will not chirp.
remote valet
The transmitter channel programmed into this feature will make the
system enter/exit valet mode.
remote start
z
This feature is only available with IntelliStart connected
z
The transmitter channel programmed into this feature will
activate or shut down the Intellistart remote start system.
window control
z
This feature is only available with SmartWindows connected
z
The transmitter channel programmed into this feature will
activate the vent or roll down feature of the SmartWindows
system.
clear all remotes
z
This feature will erase all remote codes from the system
memory. This feature is convenient for erasing any transmit-
ters that have been lost, stolen, or incorrectly programmed
into the system.
z
After entering this feature press any button on the transmit-
ter; the siren will chirp to indicate that all transmitters have
been erased from memory.
