35
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
system sensors and adjustments
Your system was installed with one of 3 different sensor configuration
options. Either, Digital Dual Zone proximity sensor, Ultrasonic sensor, or
Tilt/Motion & Glass Tamper sensor.
Proximity Sensor
: The digital dual-zone proximity sensor uses dig-
ital signal processing to detect mass movement inside the pas-
senger compartment and very near the vehicle. The sensor is
impervious to air movement so it is ideal for use on convertible
vehicles.
Glass Tamper Sensor:
Metal on glass, glass cracking, and breaking
glass each produce distinctive acoustic signatures. The 506T glass
tamper sensor uses a microphone to pick up sounds, and then ana-
lyzes them with proprietary acoustic software to determine if the
glass has been struck.
Tilt/Motion Sensor:
The 507T sensor detects when the vehicle is
being raised in an attempt to either remove the wheels/tires or
tow the vehicle. This sensor is capable of learning the vehicle’s ini-
tial angles of vertical and horizontal inclination each time the
vehicle is parked.
Ultrasonic Sensor:
The 509U sensor is used to provide coverage
of a vehicle’s interior cabin area. The sensor detects movement
inside the vehicle by sensing air disturbance.
For sensitivity adjustments for all sensors, please return to your
installing Clifford dealer.
