Diono Radian 5, Инструкция по эксплуатации

Страница: 6 / 55

Fitting the detachable base:
1. Ensure the seat section is locked in the unfolded position (see page 7) .
2. Ensure the car seats adjustable seat base is in the raised horizontal position (see
page 13) .
3. Align the hooked feet on the top of the detachable base and insert them into holes
in the underside of the seats base
(Fig. 1) .
4. Slide the detachable base towards the back of the car seat (Fig. 2) .
5. Push the metal locking pin down to fasten the detachable base to the car seat (Fig. 3) .
Removing the detachable base:
1. Lift the metal locking pin upwards to unlock the detachable base (Fig. 3) .
2. Slide the detachable base towards the front of the car seat.
3. Pull the detachable base off the base of the car seat.
Tip: Slot the detachable base into the top of the car seat when transporting (Fig. 4).
4
WARNING:
• The detachable base MUST only be used when the car seat is fitted in
the rear-facing position.
• Do NOT use when car seat is forward-facing.
Retaining
hooks
1
2
IMPORTANT:
When changing the position of the harness ensure the webbing and metal retainer are
fitted as shown in the diagram below.
Removing & fitting the harness buckle
Position 1
Position 2
Position 3
Group Child Weight Buckle position
Group 0+, 1 From Birth to 18 kg Use Position 1
Groups 1, 2 From 9 to 25 kg Use Position 2
Position 1 Position 2
Position 1
Position 2 Position 3
IMPORTANT:
Check to ensure the harness buckle is fitted in the correct position for the age/weight
of the child you are putting in the car seat.
1. Ensure the seat section of the car seat is locked in the unfolded position (See
pages 7 and follow the instructions for unfolding the car seat).
2. Unbuckle the harness by sliding the release button downwards (Fig. 1)
3. Push the strap on the bottom of the buckle down through the base of the car seat until
you can see the metal buckle retainer through the seat belt slot in the seat section
(Fig. 2).
4. Slide your hand through the seat belt slot under the seat and grip the metal
buckle retainer. Turn the retainer until it is vertical and push through the slot in
the plastic frame, padded insert and through the slot in the cover
(Fig. 2).
1
Harness buckle location
2
11 10
Detachable base
3
UNLOCKED
LOCKED