Diono Radian 5, Инструкция по эксплуатации

Страница: 14 / 55

Warranty information
Cleaning the harness buckle:
1. If a child eats or drinks in the car seat,
periodically clean the harness buckle
to ensure it functions correctly.
2. Remove the buckle following the
instructions on pages 11-12.
3. Rinse thoroughly in luke warm hot
water or soak 3 – 6 hours to loosen
dried liquids or hardened food
debris.
Do NOT
get the buckle strap
wet. Carefully rinse only the buckle
mechanism.
4. Towel dry.
5. Confirm proper buckle function after cleaning by repeatedly fastening and
unfastening the buckle. If no
“CLICK“ is heard when the tongues are inserted,
repeat the cleaning process.
• Use
ONLY
water to clean the buckle.
• Do NOT use solvents or abrasive cleaners.
Diono warranties this product only to the original purchaser effective from the date
of purchase for 1 year. In case of warranty claim, the original (not a copy) proof of
purchase sales receipt must be returned with the product.
The warranty does not cover natural signs of wear, damage resulting from excessive
stress or improper use.
Radian 5 is eligible for the diono Lifetime Warranty which guarantees the child
restraint against manufacturing defects for the entire period of its recommended use
The Lifetime Warranty is supplementary to the standard warranty detailed above. In
order to obtain a Lifetime Warranty, registration is required at :
www.diono.com/lifetimewarranty.
The Lifetime Warranty does not cover wear and tear or damage caused by misuse. Full
terms and conditions apply and can be found when registering online.
All materials on this product meet high requirements for colour fastness when exposed
to direct sunlight. However, all fabrics fade when exposed to UV radiation. This is not a
material defect, but rather a normal sign of wear which is not covered by the warranty.
For complete warranty information and details, visit
www.diono.com.
Note: Buckle malfunction is often a result of an accumulation of dust and dirt which
may impair its functionality.
If this happens, the buckle can be cleaned as per the user instructions.
Cleaning and maintenance (cont.)
Removing the fabric cover
1. Remove the harness as shown on page 15.
2. Remove the harness buckle as shown on page 11.
3. Pull the cover up and off the top of the backrest.
4. Pull the clips on the front of the underside of the seat of the car seat.
5. Carefully pull the cover off the frame of the frame of the car seat.
6. Undo the four press studs fastening the cover to the back corners of the seat section.
7. Pull the harness straps through the slots in the sides of the seats cover.
8. The cover can now be washed following the fabric care label on the cover.
Refitting the fabric cover:
Reverse the instructions used to remove the cover above.
27 26