August 2003
Rev. 2
Page 6
©
2003 Dionex
3. Installing a Column
To open the TCC-100 push the front panel
against the enclosure and press the release
button on top of the housing.
The TCC-100 front panel tilts downward and
the fan stops automatically if temperature
control is enabled.
Tighten the column clips into place using a
screw driver.
Press the column into the column clips.
To close the front panel tilt it upwards…
…until you hear the locking mechanism
engage. The fan restarts automatically.
Please note:
For precise temperature control, make sure that the front panel is closed
properly.
Push
Press
