August 2003
Rev. 2
Page 3
©
2003 Dionex
The temperature display starts flashing.
In
stand-alone control
, press the
Minus
or
Plus
key on the front panel to activate
temperature control. The preset temperature set point is displayed for information. The
temperature display stops flashing and indicates the actual temperature. The column chamber
is heated or cooled to preset temperature set point.
To increase or decrease the value, press the
Plus
or
Minus
key until the display starts
flashing. You can change the set point in increments of 0.1°C as long as the display is
flashing. To change the temperature value more quickly, hold down the key. The display stops
flashing when you release the key, and then displays the actual temperature again.
To interrupt operation without turning off the instrument, press the
Standby
key. This sets the
instrument to standby mode. To resume operation, press the
Standby
key again.
