August 2003
Rev. 2
Page 10
©
2003 Dionex
Connect the column inlet to the outlet of the relevant preconditioner (here: to the preconditioner
installed in the top position in the column chamber).
Press the column into the column clips.
(In this example, the column is installed
directly on the eluent preconditioner.)
Install a capillary between valve position 3
and ...
… the outlet of the corresponding column
(here: to the column installed in the top
position.)
Please note:
If valve position 2 was used for the column
inlet, valve position 3 must be used for the
column outlet.
Connect a capillary to valve position 5 and …
